TECH
Home / Tech Packs
Factory-ready documentation
TECH PACK DESIGN
Professional technical packs that tell your factory exactly what to make: flats, measurements, fabrics, colours, stitching, placement, trims, BOM and production instructions.
01
Technical Flat Sketches & Garment Views
- Technical flat sketches
- Front & back garment views
- Detail callouts for pockets, collars and trims
- Clean vector flats, true to scale
Front view
Back view
Shorts · front
Hoodie · front
02
Measurement Charts & Size Specifications
- Points of measure with graded sizes
- Size specifications and tolerances
- Base-size fit notes
- Ready for factory QC checks
| POM | Point of measure | S | M | L | XL | Tol. |
|---|---|---|---|---|---|---|
| A | Chest width (2.5cm below armhole) | 52 | 54 | 56 | 58 | ±1 |
| B | Body length (HPS) | 69 | 71 | 73 | 75 | ±1 |
| C | Shoulder width | 45 | 47 | 49 | 51 | ±0.5 |
| D | Sleeve length | 23 | 24 | 25 | 26 | ±0.5 |
| E | Sleeve opening | 18 | 19 | 20 | 21 | ±0.5 |
| F | Hem width | 51 | 53 | 55 | 57 | ±1 |
| G | Neck drop front | 9 | 9 | 9.5 | 9.5 | ±0.3 |
Sample values for illustration. Base size: M. Graded per size-specification sheet.
03
Fabric Details & Colour Specifications
- Fabric composition, weight and finish
- Pantone-style colour references
- Colourway breakdowns for each panel
- Swatch and shrinkage notes
| Component | Fabric | Weight | Content |
|---|---|---|---|
| Body | Interlock mesh | 140 gsm | 100% polyester |
| Side panel | Birdseye mesh | 125 gsm | 100% polyester |
| Collar / cuff | Rib knit | 260 gsm | 95% poly / 5% elastane |
FABRIC SWATCH · INTERLOCK
Black
PMS Black 6 C
PMS Black 6 C
Electric Blue
PMS 2728 C
PMS 2728 C
White
PMS 000
PMS 000
Dark grey
PMS 425 C
PMS 425 C
04
Stitching & Construction Details
- Seam-by-seam stitch types
- Stitches per inch (SPI)
- Construction details and finishing
- Seam map on the technical flat
Seam map
| # | Seam | Stitch | SPI |
|---|---|---|---|
| 1 | Shoulder | 504 overlock, 4-thread | 12 |
| 2 | Side seam | 607 flatlock | 10 |
| 3 | Sleeve set | 504 overlock | 12 |
| 4 | Hem | 406 coverstitch | 10 |
| 5 | Collar | Rib bind + 406 | 10 |
05
Sublimation & Embroidery Placement
- Sublimation artwork placement
- Embroidery placement, size and position
- Numbered reference callouts
- Print area and bleed guidance
FrontA
BackB
| Ref | Type | Size (W×H) | Position |
|---|---|---|---|
| A | Embroidery · crest | 8×8 cm | Left chest, 7cm from HPS |
| B | Sublimation · number | 25×30 cm | Centre back, 8cm below collar |
| C | Sublimation · all-over | Full panel | Front, back, sleeves |
06
Labels, Trims & Bill of Materials (BOM)
- Labels & trims specification
- Complete bill of materials
- Quantities per garment
- Supplier and colour references
| Item | Description | Placement | Qty / pc |
|---|---|---|---|
| Main fabric | Interlock mesh 140gsm | Body, sleeves | 0.85 m |
| Rib | Rib knit 260gsm | Collar, cuffs | 0.12 m |
| Thread | Poly-core 120/2, colour-matched | Seams | 120 m |
| Neck label | Woven damask, 40×15 mm | CB neck | 1 |
| Care label | Printed satin, size + care | Left side seam | 1 |
| Heat transfer | Number & crest (if specified) | Per placement sheet | 1 set |
| Polybag | LDPE 25µ with size sticker | Packing | 1 |
07
Production Instructions
- Step-by-step production notes
- Cutting, sewing and finishing sequence
- Quality control checkpoints
- Packing and labelling instructions
- Cutting: cut with grain line parallel to selvedge; match print panels using notch marks.
- Sublimation: print artwork on pattern template; heat-press before cutting where specified.
- Embroidery: apply to cut panel before assembly; use backing and stabiliser per placement sheet.
- Sewing: follow seam map; shoulder first, then collar, sleeves, side seams, hems.
- Quality control: check measurements against chart, tolerance per POM; inspect print alignment at seams.
- Packing: fold per diagram, polybag with size sticker, 10 pcs per carton.